Remove Users From Compute Nodes - HP 1032 Manual

account parameters to use in creating the account.
If NIS is configured in the cluster, all user accounts are administered from the Management
Server. Any changes to a user's account will be pushed to all the Compute Nodes using NIS.
References:
3.2.3 How to Run SCM Web-based GUI
Back to Top

1.6.7 Remove Users from Compute Nodes

Using the CLI
User accounts should be removed from the Management Server as normal with userdel (man
userdel(1M) for more information).
% userdel
After removing the user, use ypmake to push this change to the Compute Nodes.
% /var/yp/ypmake
Using the HPSIM GUI
To remove users from the cluster, do the following:
Select "Configure", "HP-UX Configuration", and then double-click on
"Accounts for Users and Groups".
Select the node(s) and/or node group to install on.
This will bring up the user account GUI, where you can specify the user
account to remove.
References:
3.9.4 How to run HPSIM Web-based GUI
Using the SCM GUI
To remove users from the cluster, do the following:
Select the Management Server.
Under "Tools", select "System Administration", and then click on "Accounts
for Users and Groups".
This will bring up the user account GUI, where you can specify the user