User Connections - Bosch Autodome 7000 IP Quick Manual

7 | AUTODOME 7000 IP
Installation Installed inside a VG4-A-PA0, VG4-A-PA1,
VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2
power supply box with supplied mounting
hardware
5. Kit available separately and must be installed inside the AUTODOME power supply box.
SFP Modules
Description Interchangeable modules available for use with
MMF or SMF optical fiber.
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Mechanical
Dimensions (LxWxH)
• SFP-2 and SFP-3 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)
• SFP-25, SFP-26 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
Weight (all SFP 0.23 kg (.05 lb)
modules)
Type Connector
SFP-2 MMF Duplex LC
SFP-3 SMF Duplex LC
SFP-25 MMF Single SC
SFP-26 MMF Single SC
Fiber Compatibility
Optical Fiber 50/125 µm MMF. For 50/125 µm fiber,
Compatibility, MMF subtract 4 dB from the specified optical
budget value. Must meet or exceed fiber
standard ITU-T G.651.
Optical Fiber 8–10/125 µm SMF. Must meet or exceed
Compatibility, SMF fiber standard ITU-T G.652.
Optical Distance Specified transmission distances are limited to
Specifications the optical loss of the fiber and any additional
loss introduced by connectors, splices, and
patch panels. The modules are designed to
operate over the entire optical loss budget
range, so they do not require a minimum loss
in order to operate.
Miscellaneous
Sectors/Titling 16 independent sectors with a 20-character
title/sector
Masking 24 individually configurable privacy masks
Pre-positions 256, each with a 20-character title
Guard Tours Two (2) types of tours:
Wavelength Max. Distance
(transmit /
receive)
1310 nm / 2 km
1310 nm (1.2 miles)
1310 nm / 20 km
1310 nm (12.4 miles)
1310 nm / 2 km
1550 nm (1.2 miles)
1550 nm / 2 km
1310 nm (1.2 miles)
• Recorded tours – two (2)
• Preset tour – one (1), consisting of up to
256 scenes, consecutively
Supported English, Chinese, Dutch, French, German,
Languages Italian, Japanese, Polish, Portuguese, and
Spanish

User Connections

Power, Camera RJ-45 10/100 Base-TX Ethernet (High
Power-over-Ethernet (High PoE)) or PoE+
(IEEE 802.3at, class 4 standard)
21-30 VAC, 50/60 Hz
Power, Heater RJ-45 10/100 Base-TX Ethernet (High
Power-over-Ethernet (High PoE))
21-30 VAC, 50/60 Hz
Video and Control RJ-45 10/100 Base-TX Ethernet
Alarm Inputs (7) 2 supervised; 5 non-supervised
Programmable for "normally open" or
"normally closed"
Alarm Outputs (4) 1 dry contact relay; 3 open collector/
transistor outputs
32 VDC @ 150 ma max.
Audio 1 x mono line in, 1 x mono line out
• Signal line in 12 kOhm typical, 1 Vrms max
• Signal line out 1 Vrms at 1.5 kOhm, typical
Environmental
In-Ceiling
Ingress IP54, Plenum rated
Protection
NEMA 4X for:
Rating/
• Access to Hazardous parts
Standard
• Ingress of solid foreign objects (falling dirt,
circulating dust, settling dust)
• Ingress of water (dripping and light splashing,
hosedown and splashing)
• Corrosive agents
Operating -10°C to 40°C
Temp. (14°F to 104°F)
Storage -40°C to 60°C
Temp. (-40°F to 140°F)
Humidity 0% to 90% relative, non-
condensing
6. Without heater connected in power supply box for indoor applications.
7. Meets requirements for NEMA 4X certification with use of a polycarbonate bubble.
Meets requirements for NEMA 4X, except impact test, with use of an acrylic bubble.
Construction
Dimensions See dimensional drawings
Weight
• In-ceiling 2.58 kg (5.69 lb)
Pendant
IP66
7
-40°C to 55°C
(-40°F to 131°F)
or
-10°C to 55°C
(14°F to 131°F)
6
-40°C to 60°C
(-40°F to 140°F)
0% to 100% relative,
condensing