Advertisement
Assembly: Head
Place head assembly with collar
onto notched end of tube without
connector. Align snap area on side of
head assembly collar with the notch
and catch on tube. Slide the head
assembly down onto tube and press
down firmly. You will feel a definite
click when seated properly, and the
head assembly will not turn.
Assembly: Blade & Grill
rear
blade
grill
fan
spinner
plastic nut
1. Tilt fan head back.
Put rear grill on motor.
pin
groove
3. Slide blade onto motor shaft.
(Align groove on blade hub with
pin on motor shaft.)
To secure blade, screw
fan spinner onto shaft
counter clockwise until
tight on blade hub.
ornament
front grill
g
snaps
tab
5. With fan head in upright position, align ornament of front grill
so it is horizontal. Insert bottom of front grill into plastic rear grill. Tab at
the bottom of plastic rear grill should fit between spokes of front grill.
Snap front grill into rear grill beginning at the top and working down
both sides. Note: No grill clips are needed for assembly.
106570 (Gray)
106580 (Blue)
106590 (Brown)
For product service, call customer service at 877-207-0923
Rev. B 11/00 2085335 Printed in USA
head assembly
collar
snap
notched
end
tube without
connector
rear grill
motor
2. Align triangular "∆" cut in the rear
grill with triangular post on top of
front motor cover. Fully seat rear
grill and secure with plastic nut,
turning clockwise.
ornament
front grill
slot
tab
4. Install ornament into front grill.
Insert tabs into rectangular slots.
Snap into place.
g
snaps
tab
Operation
Oscillation: Push down oscillation
knob on motor housing to make fan
head move from side to side.
Tilting: This fan is equipped with a
multi-angle fan head for whole-room
air circulation. To properly adjust the
"tilt angle" of your fan:
1. Place one hand on the pole just
under the fan neck.
2. Place other hand on top of fan.
3. Gently push or pull the fan head
until it is in the desired position.
Note: The rachet assembly on the
16" Deluxe Pedestal Fan is designed
for positive lock positioning.
Therefore, when adjusting the fan
angle, you will hear a clicking sound.
This is normal.
Speed: Control fan speed with
switch at rear of motor.
Warranty
What does your warranty cover?
• Any defect in material or workmanship.
For how long after the original purchase?
• 1 year.
What will we do?
• Provide you with a new product or refund original purchase price.
• The exchange unit is warranted for the remainder of your product's
original one-year warranty period.
How do you make a warranty claim?
• Properly pack your unit. Include all parts, which were originally provided
with the product. We recommend using the original carton and packing
materials.
• Include in the package a copy of the sales receipt or other evidence of
date of original purchase. Also print your name and address and a
description of the defect. Return product to your nearest Wal-Mart
store. A new or reconditioned unit will be provided.
• For product service or replacement parts, call customer service at
877-207-0923.
What does your warranty not cover?
• Customer instruction. Your Owner's Manual provides information
regarding operating instructions and user controls. For additional
information, ask your dealer.
• Installation and set-up service adjustments.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Product purchased or serviced outside the USA.
• Acts of God, such as but not limited to lightning damage.
How does state law relate to this warranty?
• This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
What if you purchased your product in the U.S., Canada or Mexico and
encounter a problem while using it outside the country of purchase?
• The warranty is valid only in the country of purchase and if you follow
the warranty claim procedure as noted.
Down: Oscillate
Up: Stationary
g
is a trademark of the General Electric
Company used under license by
Wal-Mart Stores, Inc., Bentonville, AR.
2
Advertisement
