Loading Documents In The Automatic Document Feeder - Epson GT-1500 User Manual

Home > Placing Originals on the Scanner

Loading Documents in the Automatic Document Feeder

Document Specifications
Loading Documents in the ADF
You can load your original documents in the ADF to scan multiple pages quickly.
Before loading documents in the ADF, see
in the ADF.
Document Specifications
The table below lists the sizes of paper you can load in the ADF. You can load up to 40 sheets (a stack thickness of 5.0
mm/0.2 inch or less) in the ADF.
Only load sheets that are all the same size in the ADF.
Paper size
A4
Letter
Legal
B5
A5
A6 (Portrait)
Load only documents that meet the following specifications in the ADF.
Size
Weight
Paper type
Make sure your documents meet the following conditions before loading them into the ADF.
The ink is dry.
The document has no holes and is not ripped or wrinkled.
The document has no staples, paper clips, or other objects attached to it; these may damage the feeder
mechanism.
The document has no folds.
The document has no cut-out areas.
The document is not a multi-part form or bound.
The document has no rear carbon coating.
See Loading Documents in the ADF
Document Specifications
Measurements
210 × 297 mm (8.3 × 11.7 inches)
215.9 × 279.4 mm (8.5 × 11 inches)
215.9 × 355.6 mm (8.5 × 14 inches)
182 × 257 mm (7.2 × 10.1 inches)
148.5 × 210 mm (5.9 × 8.3 inches)
105 × 148.5 mm (4.1 × 5.9 inches)
Width: 105 to 216 mm (4.1 to 8.5 inches)
Length: 148.5 to 356 mm (5.9 to 14 inches)
50 to 120 g/m 2
High-quality paper, Bond paper, Check paper, Recycled paper
for instructions on loading your documents in the ADF.
to make sure your original documents can be loaded
Top