Table of Contents
Advertisement
ATTACHING THE AIR CLEANSING FILTERS
CAUTION
Cleaning and maintenance must be carried out only by qualiÀ ed service personal. Before cleaning,
stop operation and switch off the power supply.
1
Open the front panel.
●
Pull up the front panel by holding it at both sides
with both hands.
2
Remove the À lter.
●
Push upward to release the claws and pull out the
À lter.
3
Attaching the air cleansing À lters to the À lter.
●
Attach the air cleansing À lters to the frame by gently
compress its both sides and release after insertion
into À lter frame.
CAUTION
Do not bend the air cleansing
À lter as it may cause damage
to the structure.
4
Attach the À lters.
●
Attach the À lters by ensuring that the surface written
"FRONT" is facing front.
●
After attaching the À lters, push the front panel at
three arrow portion as shown in À gure and close it.
NOTE
●
In case of removing the air cleansing À lters, please follow the above procedures.
●
The cooling capacity is slightly weakened and the cooling speed becomes slower when the air
cleansing À lters are used. So, set the fan speed to "HIGH" when using it in this condition.
●
Air cleansing À lters are not washable. It is recommended to use vacuum to clean it. It can be use
for 1 year time. Type number for this air cleansing À lter is <SPX-CFH22>. Please use this number
for ordering when you want to change it.
●
Do not operate the air conditioner without À lter. Dust may enter the air conditioner and fault may
occur.
Claws
(4 places)
– 17 –
Hide quick links:
Advertisement
Table of Contents
