The following screen lets you select the method for adding the WPS client (a wireless
device or computer).
3.
Select either Push Button or PIN Number.
•
To use the push button method, either click the WPS button on this screen, or press
the WPS button on the side of the router. Within 2 minutes, go to the wireless client
and press its WPS button to join the network without entering a password.
•
To use the PIN method, select the PIN Number radio button, enter the client security
PIN, and click Next.
Within 2 minutes, go to the client device and use its WPS software to join the network
without entering a password.
The router attempts to add the WPS-capable device. The WPS LED
the router blinks green. When the router establishes a WPS connection, the LED is solid
green, and the router WPS screen displays a confirmation message.
4.
Repeat Step 2 and Step 3 to add another WPS client to your network.
N900 Wireless Dual Band Gigabit Router R4500
NETGEAR genie Advanced Home
34
on the front of