Table of Contents
Advertisement
5)
Press qw to switch the item.
[3D SYNC MODE]
[OFF]
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
6)
When [1], [4], [7], or [10] is selected, press as to select [STEREO SYNC OUTPUT DELAY], and press
qw to set the amount of delay output.
[0us] - [25000us]
f To synchronize multiple projectors to display 3D images, use a frame synch input and output.
Select [9] or [10] for the first projector.
Select [6], [7], or [8] for the second and subsequent projectors.
f Stereo synchronization is a signal having a 50 % duty cycle where High is for the left eye and Low is for the right eye.
f "H" is output to the 3D image display and "L" is output to the 2D image display from the terminal for which 3D trigger output is selected.
Note
f [3D SYNC MODE] or [11] is the setting when the 3D IR TRANSMITTER TY-3DTRW of Panasonic is used with the projector. Consult your
dealer regarding the connection method.
[3D SIMUL INPUT SETTING]
Set this item to input and use 3D video signals of the simultaneous system.
1)
Press as to select [3D SIMUL INPUT SETTING].
2)
Press the <ENTER> button.
f The [3D SIMUL INPUT SETTING] screen is displayed.
3)
Press as to select [LEFT:RGB1 RIGHT:RGB2] or [LEFT:HDMI RIGHT:DVI-D].
4)
Press qw to switch the setting.
[OFF]
[AUTO]
Note
f When set to [AUTO], 3D images are displayed when the same 3D compatible signals are entered to each input. However, the P IN P status
during P IN P is maintained.
f This may not function properly for some connected external devices.
f Certain signals may not function properly.
[3D INPUT FORMAT]
Set the 3D format for the image signals being input.
Set a 3D format that matches the input signal.
1)
Press as to select [3D INPUT FORMAT].
2)
Press the <ENTER> button.
f The [3D INPUT FORMAT] screen is displayed.
3)
Press as to select a 3D format.
[AUTO]
*1
Chapter 4 Settings — [3D SETTINGS] menu
Items set in [3D SYNC1]
Not used.
3D trigger output
3D trigger output
Stereo synch input
Stereo synch input
Stereo synch input
Frame synch input
Frame synch input
Frame synch input
3D trigger output
Stereo synch output
3D IR TRANSMITTER (+) output
Allows you to set in increments of 10 us.
Does not display 3D images of the simultaneous system.
Displays 3D images of the simultaneous system.
Automatically detects 3D format of input image signals and displays images.
Items set in [3D SYNC2]
Not used.
Stereo synch output
3D trigger output
Through 3D SYNC1
Stereo synch output
3D trigger output
Through 3D SYNC1
Stereo synch output
3D trigger output
Frame synch output
Frame synch output
3D IR TRANSMITTER (-) output
ENGLISH - 91
Hide quick links:
Advertisement
Table of Contents
