Craftsman 486.243201 Owner's Manual page 7

STEP 9: (SEE FIGURE 9)
• Align the holes in the handle with the holes in the
bottom of the poly tray, the latch stand plate and the
latch stand bracket. Fasten together using four 1/4"
x 1-3/4" hex bolts (D), 1/4" fl at washers (I) and 1/4"
nylock nuts (J). Tighten.
At this time tighten all bolts which were left loose.
•
(I) 1/4" FLAT
WASHER
(J) 1/4"
NYLOCK
NUT
FIGURE 9
CART WITH TONGUE ARRANGED FOR TOWING
(H) 3/8" x 1"
CLEVIS PIN
(G) 3/8" x 4"
CLEVIS PIN
FIGURE 10
(D) 1/4" x 1-3/4"
HEX BOLT
LATCH LOCK
FRONT
TONGUE
STEP 10: (SEE FIGURE 11)
• Assemble the hitch pin (Q) through the tongue and
hitch bracket and secure it with the 1/8" hairpin cotter
(M).
(Q) HITCH PIN
FIGURE 11
STEP 11: (SEE FIGURE
• Attach two noise reduction pads (R) on each side of
the front tongue.
FIGURE 12
7
HITCH
BRACKET
(M) 1/8" HAIRPIN
COTTER
)
12
PADS (R)
PADS (R)