Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Baumatic PCC9120SS
Summary of Contents for Baumatic PCC9120SS
- Page 1 PCC9120SS 90cm Multi-function cooking theatre...
- Page 2 User Manual for your Baumatic PCC9120SS 90 cm Multi-function cooking theatre NOTE : This User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;...
-
Page 3: Table Of Contents
Contents Environmental note Important safety information 5 – 9 Specifications 9 – 10 Thermostat control knob Oven function selector knob Oven programmer/timer Oven programmer/timer display Setting and using the oven programmer/timer 12 - 16 Selecting manual operation mode Setting the time of day Setting the minute minder function Setting the duration function Setting the end cook function... -
Page 4: Environmental Note
Environmental note o The packaging materials that Baumatic uses are environmentally friendly and can be recycled. o Please discard all packaging material with due regard for the environment. -
Page 5: Important Safety Information
Your new appliance is guaranteed against electrical or mechanical defects, subject to certain exclusions that are noted in Baumatic’s Conditions Of Guarantee. The foregoing does not affect your statutory rights. o Repairs may only be carried out by Baumatic Service Engineers or their authorised service agent. - Page 6 Warning and safety instructions o This appliance complies with all current European safety legislation. Baumatic do wish to emphasise that this compliance does not remove the fact that the appliance surfaces will become hot during use and retain heat after operation.
- Page 7 o Do not place heavy objects on the oven door or lean on the oven door when it is open, as this can cause damage to the oven door hinges. Nobody should be allowed to sit or stand on any part of the cooker.
- Page 8 Please see the specific section of this booklet that refers to installation. o Baumatic Ltd. declines any responsibility for injury or damage, to person or property, as a result of improper use or installation of this appliance.
-
Page 9: Specifications
o The above directives comply with 93/68/EEC regarding CE marking. o The manufacturer declares that the oven is built using certified materials and requires the appliance to be installed in accordance with the standards currently in force. This appliance must be used by a trained person for domestic purposes only. Specifications Product dimensions: Height: 870 - 920 mm... - Page 10 Standard accessories: o Wok stand o Removable side racks o 2 x safety shelves o Enamelled drip tray o Trivet o LPG conversion jets Optional extras: o BPS1 Pizza stone o BTGRID Double-sided griddle plate Electrical details Rated Voltage: 230 Vac 50 Hz Supply Connection: 13 A (double pole switched fused outlet with 3mm contact gap)
-
Page 11: Thermostat Control Knob
Control Panel Thermostat control knob o Use this control knob to control the temperature in the oven. Oven function selector knob o Use this control knob to select the oven function and turn on the oven light. Oven programmer/timer Oven programmer/timer display “Auto”... -
Page 12: Setting And Using The Oven Programmer/Timer
Setting and using the oven programmer/timer Selecting manual operation mode After your appliance is connected to your mains supply for the first time, the numbers on the timer display will flash. Before you can select a cooking function or set a temperature, you must set the appliance into “manual operation”... -
Page 13: Setting The Minute Minder Function
Setting the minute minder function You are able to set the minute minder at any time, regardless of whether an oven function has been selected. You can set a period of time using the minute minder function and an alarm will sound when this period of time has elapsed. -
Page 14: Setting The Duration Function
Setting the duration function This function will allow you to set a countdown time similar to the minute minder function. However the oven will no longer continue to heat, once the countdown period has elapsed. o Use the thermostat control knob to set the temperature that you require. -
Page 15: Setting The End Cook Function
Setting the end cook function This function is similar to the duration function, however instead of selecting a period of time that you wish the oven to switch off after. You select the time of day that you wish the oven to switch off at. -
Page 16: Setting The Start And End Time Function
Setting the start and end time function This function will allow you to set a time in the future that the oven switches on at and a time that the oven will switch off at. o Use the thermostat control knob to set the temperature that you require. -
Page 17: Selecting A Cooking Function And Temperature
Selecting a cooking function and temperature Selecting manual operation mode After your appliance is connected to your mains supply for the first time, the numbers on the timer display will flash. Before you can select a cooking function or set a temperature, you must set the appliance into “manual operation”... -
Page 18: Cooking Functions
There are eight cooking functions available on your appliance: OVEN LIGHT: Separate light control which allows the light to be switched on, even when the oven is not heating. DEFROST MODE: The fan runs without heat to reduce the defrosting time of frozen foods. The time required to defrost the food will depend on the room temperature, the quantity and type of food. -
Page 19: Thermostat Control Knob
hermostat control knob (main oven) he oven thermostat control knob should be turned clockwise and it sets the required temperature of the oven. It is possible to regulate the temperatur within a range of 60 - 250°C. ven operating light his light will come on to indicate that the oven’s heating elements are in operation. -
Page 20: Using The Hob Top
o The oven light will remain on during cooking. a nings o Keep the oven door closed when using any of the grill or oven functions. o Do not use aluminium foil to cover the grill pan or heat items wrapped in aluminium foil under the grill. -
Page 21: Automatic Electric Ignition
o Never select a knob position between the maximum and off position. utomatic electric ignition o ignite a burner: o Press in the control knob of the burner that you wish to light and turn it clockwise to the maximum position. o If you keep the control knob depressed, the automatic ignition for the burner will operate. -
Page 22: Cleaning And Maintenance
Any damage that is caused to th e appliance by a cleaning product will not be fixed by Baumatic free of charge, even if the appliance is within the guarantee period. -
Page 23: Cleaning The Hob Burners
leaning the hob burners The hob burners should be cle aned once a week or more frequently if ey get soiled. o Remove th e hob burners by pulling them upwards and away from the hob top. Soak them for abou t ten minutes in hot water and a little detergent. -
Page 24: Removing The Oven Door For Cleaning
emoving the oven door for cleaning Open the oven door fully. o The hinges (A) are provide d with two movable hooks (B). o Rotate the hooks into the slot (C). o You should grip the sides of the doo r at the centre and then incline it slightly towards the oven cavity and then by pulling it gently away from the oven cavity. -
Page 25: Removing The Inner Door Glass For Cleaning
emoving the inner door glass for cleaning o To facilitate cleaning, the inner door glass can be lifted out of the oven door. Open the do or halfway, you will see two screws on the top edge of the door. You should use a screwdriver to remove the screws and the strip that goes along the top of the oven door. -
Page 26: Installation
o IMPORTANT: Do not attempt to remove the door glass only using one hand. IMPORTANT: Ca re must be taken when cleaning between the door glasses, and inside the inner frame as some of the edges maybe sharp due to the manufacturing process. Inst allation The installation must be carried out by a suitably... - Page 27 (including the burners). o Baumatic do not recommend that the cooker is positioned below wall cupboards, as the heat and steam from the appliance and what is being cooked, may damage the cupboard and its contents.
-
Page 28: Gas Connection
Conversion for use on LPG and other gases must only be undertaken by a qualified person. For information on the use of other gases, please contact the Baumatic Technical Department. o The cooker must be installed by a qualified person, in... -
Page 29: Ventilation Requirements
o In the UK, CORGI registered installers are authorised to undertake the installation and service work, in compliance with the above regulations. Ventilation requirements o The room containing the cooker should have an air supply in accordance with the current edition of BS 5440: Part 2: o The room must have opening windows or equivalent;... -
Page 30: Gas Safety (Installation And Use) Regulations
Gas Safety (Installation and Use) Regulations o It is the law that all gas appliances are installed by competent persons in accordance with the current edition of the Gas Safety Installation and Use Regulations. o It is in your interest and that of safety to ensure compliance with the law. -
Page 31: Gas Adjustment (Conversion To Lpg)
o Care should be taken to ensure that the temperature rise of areas at the rear of the cooker that are likely to come in contact with the flexible hose do not exceed 70°C. o Gas pressure may be checked on a semi-rapid hob burner. Remove the appropriate injector and attach a test nipple. - Page 32 o Reassemble all the burners carefully; in particular you should make sure that the flame spreader is correctly placed on the burner. IMPORTANT: After changing the injectors YOU MUST follow the minimum flow adjustment section below.
-
Page 33: Minimum Flow Adjustment For Hob Gas Taps
Minimum flow adjustment for hob gas taps. All work must be carried out by a CORGI registered engineer. o Light the burner and set the knob at the minimum position. o Remove the knob from the tap and place a small bladed screwdriver in the centre of the tap shaft. -
Page 34: Fitting A Stability Chain
Fitting a stability chain IMPORTANT: It is a legal requirement for your CORGI registered installer to fit a stability chain. The stability hook should be securely fixed to the fabric of the building, in an adjacent position to the safety chain at the rear of the appliance. The chain should be kept as short as is practical. -
Page 35: Electrical Connection
Electrical connection This appliance must be installed by a qualified person in accordance with the latest edition of the I.E.E. Regulations and in compliance with Baumatic’s instructions. Before connecting the appliance, make sure that the supply voltage marked on the rating plate corresponds with your mains supply voltage. -
Page 36: Replacing The Mains Supply Cable
o The cable can be looped if necessary, but make sure that is not kinked or trapped when the cooker is in position. Replacing the mains supply cable If the mains supply cable is damaged, then it must be replaced by an appropriate replacement. -
Page 37: My Appliance Isn't Working Correctly
My appliance isn’t working correctly o The oven isn’t coming on. * Check that the oven is in manual operation mode. * Check that you have selected a cooking function and a cooking temperature. o There appears to be no power to the oven and grill. * Check that the appliance has been connected to the electrical mains supply correctly. - Page 38 Or any installation other than the one specified by Baumatic Ltd. has been completed. Please refer to the conditions of guarantee that appear on the...
-
Page 39: Contact Details
Czech Republic Baumatic CR spol s.r.o. Amperova 495 46215, Librec Czech Republic +420 800 185 263 United Kingdom Baumatic Ltd., www.baumatic.cz Baumatic Buildings, 6 Bennet Road, Slovak Republic Reading, Berkshire Baumatic Slovakia, s.r.o. RG2 0QX Skultetyho 1 United Kingdom 831 04 Bratislava 3...