Connecting The Y/C (S-Video) Signal To The Monitor; Connecting Audio To The Monitor; Connecting The Pc Signal To The Monitor; Hdmi Connection - Bosch UML-273-90 Installation Manual

30 en | Installing the Monitor
5.4 Connecting the Y/C (S-Video) Signal to the
Monitor
There is one (1) mini-DIN type connector for the S-Video (Y/C)
input (refer to Rear Panels, page 20) on the rear side panel.
Note: Both Y and C inputs are terminated with 75 Ohm.
Figure 5.1: Y/C Connector pin-out
Number
1
2
3
4
5.5

Connecting Audio to the Monitor

There are three (3) set of stereo audio connectors for audio
inputs, located on the rear panel.This audio inputs are not
associated with any input terminals on the rear panel, and can
be freely connected to any audio input.
5.6

Connecting the PC Signal to the Monitor

There are three ways to connect the PC signal to the monitor:
HDMI, DVI, and VGA.
5.6.1

HDMI Connection

The monitor can be connected to the HDMI (High Definition
Multimedia Input) by connecting a HDMI cable (not supplied).
2013.02 | 3.0 |
Input
Ground
Ground
Y-signal
C-signal
Installation Manual
Bosch High Performance
HD LED Monitors
Bosch Security Systems, Inc.