Super Io Device - Acer Veriton 7900Pro Service Manual

Super IO Device

Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
:Move Enter: Select +/-/PU/PD :Value F10:Save ESC:Exit F1:General Help
Parameter
Onboard FDC Controller
Onboard Serial Port 1/2
Onboard Parallel Port
ECP Mode Use DMA
Chapter 2
Phoenix - AwardBIOS CMOS Setup Utility
SuperIO Device
[Enabled]
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[SPP]
3
F5:Previous Values F7:Default Settings
Description
Select Enabled if your system has a floppy disk
controller (FDC) installed on the system board
and you wish to use it. If you install an add-in
FDC or the system has no floppy drive, select
Disabled in this field.
Select a logical COM port name and matching
address for the first and second serial ports.
Select an address and corresponding interrupt
for the first and second serial ports.
Select a logical LPT port address and
corresponding interrupt for the physical parallel
port.
Select a DMA channel for the port.
Item Help
Menu Level
Options
Enabled
Disabled
Please refer to the BIOS on your
system for actual options.
Please refer to the BIOS on your
system for actual options.
Please refer to the BIOS on your
system for actual options.
47