Installing A J-Model In An Existing Wall Case - GE 10 ACA Owner's Manual

Installing a J-Model in an existing wall case.

Read these instructions completely and carefully.
IMPORTANT!
GE strongly recommends the removal of the old
wall case and the installation of a new GE Wall
Case. If you decide to keep the existing wall
case, you may need a kit to ensure proper
performance. If you DO NOT use a kit, you
run the risk of poor performance or product
failure. This is not covered under the terms
of the GE warranty.
J-Model Qualifying Questions
J-model air conditioners may fit in existing wall
cases. However, they often need a kit to properly
adapt the case to the GE air conditioner. Answer
these questions and see the chart below for the
proper kit.
What brand air conditioner will you be
A
replacing?
What are the dimensions of the wall case
B
currently in use?
What is the model number of the chassis
C
currently in use? What is the model (or Type)
number of the wall case currently in use?
Frequently, the J-model adapter kit will apply
to another brand model "series" or specific
vintage. In these cases, you need the chassis
model number and/or the wall case or "type"
number to confirm the use of the correct
adapter kit.
What type of outdoor grille is used with the
D
current wall case?
There may be an architectural grille attached
to a wall case to enhance the exterior
appearance of the building. Custom grilles
may be used with J-model wall cases provided
a J-model adapter kit is also used to ensure
proper airflow.
10