Removing And Replacing The Warming Drawer - Samsung NE58F9710WS User Manual

÷
How to replace the door
1,
2.
Firmly grasp both sides of the door at the top.
With the door at the same angle as the removal position, slide the indentation of the hinge arm
into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into
the bottom of the slot.
IHinge arm
3,
Bottom Indentation
edge of slot
Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the
bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the locked position.
Hinge lock
Unlocked position Locked position
5. Close the oven door.
@
REMOVING AND REPLACING THE WARMING DRAWER
CAUTION
How to remove the warming drawer
1,
2.
Pull out the drawer until it stops.
Locate the locking clips near the back of each full-extension roller guide rail. Using two hands,
push down on the left clip and lift up on the right clip to release the clips. Pull the drawer the
rest of the way out.
your appliance 70
130513_(IB_Best)NE58F9710WS_DG68-00506A_EN.indd 70 4_ 13/05/2013 08:27:17