Table of Contents
Advertisement
Before You Begin
Front Panel
The front panel provides Power, Message, Data, and Home LAN indicators, Output
video format indicator, 4-character 7-segment display, two Recording indicators, IR
remote control sensor, and buttons.
Rear Panel
The rear panel contains a power input; connectors for video, audio, and RF cabling; data output; and data interface connectors. Some
connectors are not enabled and require the support of application software.
1
Cable In — Connects to the signal from your service provider
2
RF Out — Ch 3/4 modulated audio/video (SDTV) to TV or VCR
3
S-Video — Connects to S-Video (SDTV) input of TV or VCR
4
Digital Audio (S/PDIF)* — Provides Dolby® Digital 5.1 audio or PCM output
5
YPbPr — Component video output (HDTV)
6
Video — Composite video (SDTV) output
7
Audio — Audio L/R outputs
DCX3501-M Quick Start Guide
Cursor — Menu navigation
1
Select — Selects menu options
2
Power — Turns the set-top on and off (standby)
3
Menu — Displays the menu
4
Guide — Displays the program guide
5
Info — Displays current channel and program information
6
Format* — Changes the video output format
7
Channel — Changes channel up or down
*Availability of certain features is dependent upon application support
8
eSATA* — External Serial ATA disk interface
9
HDMI — HDTV audio and video connector
10
USB* 2.0 — High-Speed peripheral device connection
11
Ethernet* — Network connection
12
IR Remote Input — Connects to a remote control set-top accessory cable
13
IEEE-1394 — Audio and HDTV video device connection (US models only)
14
Power cord connector — DC input
*Feature is dependent upon application support
...Not active at this time.
2
Hide quick links:
Advertisement
Table of Contents
