Kenwood 103AR Instruction Manual page 17

Audio section
Rated power output at the STEREO operation
50 watts per channel minimum RMS, both channels driven ]
at 8 _, from 30 Hz to 20,000 Hz with no more than 0.09 %
total harmonic distortion. (FTC) j
Total harmonic distortion
...................................................... 0.03 % (1 kHz. 25 W, 8 _2)
Signal to noise ratio (IHF'66)
PHONO (MM) ................................................................ 76 dB
LINE (CD, VIDEO, TAPE) .............................................. 93 dB
Input sensitivity / impedance
PHONO (MM) ................................................ 2.6 mV / 47 k[2
LINE (CD, VIDEO, TAPE) ............................. 200 mV / 47 k_
Tone controls
BASS ......................................................... ± 8 dB (at 150 Hz)
TREBLE ...................................................... ± 8 dB (at 10 kHz)
LOUDNESS control at - 30 dB VOLUME level
....................................................................... + 6 dB (150 Hz)
FM Tuner section
103AR (En]
Tuning frequency range ....................... 67.5 MHz ~ 108 MHz
Usable sensitivity
MONO ............................................. 1,4 pV (75 _) / 14,2 dBf
(75 kHz dev,. S/N 30 dB)
50 dB quieting sensitivity
STEREO .............................................. 44 pV (75 £2) / 44.2dBf
(75 kHz dev,)
Total harmonic distortion (1 kHz)
MONO ................................................ 0.6 % (65.2 dBf input)
STEREO .............................................. 0.7 % {65.2 dBf input)
Signal to noise ratio (1 kHz, 75 kHz dev.)
MONO ................................................ 75 dB (65.2 dBf input)
STEREO .............................................. 68 dB (65.2 dBf input)
Stereo separation
1 kHz .............................................................................. 40 dB
Selectivity (±400 kHz) .................................................... 50 dB
Frequency response .......... 30 Hz ~15 kHz, + 0.5 dB.- 3.0 dB
AM Tuner section
Tuning frequency range ........................ 530 kHz ~ 1,700 kHz
Usable sensitivity {30 % mod., SIN 20 dB)
.............................................................. 20 pV I (560 pV / m)
Total harmonic distortion ............................................. 0.7 %
Signal to noise ratio (30 % mod., I mV input) ............ 48 dB
Selectivity ....................................................................... 30 dB
General
Power consumption ..................................................... 130 W
AC outlet
SWITCHED .............................. 2: (total 150 W, 1.25 A max.)
Dimensions ................................... W:440 mm (17-5/16")
H:127 mm (5")
D:380 mm (14-16/16")
Weight (net) ..................................................... 6.9 kg (15.2 Ib)
_e KENWOOD followsa policy of continuous advancements m development For this reason specifications may be changed without
notice
Memory backup function
Please note that the following items will be deleted from
this unit's memory if the power cord is disconnected from
the AC outlet for approximately three days.
• POWER status (ON or OFF)
• System control mode setting (Ixse] or ISL16])
• Input setting
• Volume level
• Receiving band
• Frequency
• Preset stabons