Circulation Operation; How To Set The Sleep Timer - Hitachi RAS-18C9 Instruction Manual

CIRCULATION OPERATION

I When the room temperature is higher than the thermostat set temperature, only the fan operates to
circulate the upper hotter air downwards. This makes temperature distribution of the room evenly at
heating.

HOW TO SET THE SLEEP TIMER

Example: Setting 3 hours
sleep time.
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the
button.
The (RESERVED) sign goes out with a beep and the
NOTE
If you set the sleep timer when the off-timer or
on/off-timer has been set earlier, the sleep timer
becomes effective instead of the off- or on/off-
timer set earlier.
1
Press the
G
Operation start with a signal received sound "beep".
Press the
STOP
G
Make sure you have been select the
the (FUNCTION) Button.
G
You can select the fan speed and desired temperature.
G
This operation is useful in winter when using other heating equipment.
Mode
4
Sleep timer
Sleep Timer: The device will continue working for the designated
number of hours and then turn off.
Point the signal window of the remote controller toward the indoor
unit, and press the SLEEP button.
The timer information will be displayed on the remote controller.
The TIMER lamp lights with a beep from the indoor unit.
– 8 –
(START/STOP) button
(START/STOP) button
Indication
1 hour 2 hours
4 4
Sleep timer off
(TIMER) lamp turns off on the indoor unit.
(Circulate) mode by using
3 hours 7 hours
4
1
(CANCEL)