Exit Menu - Leaving The Setup Utility - Fujitsu LifeBook E752 Bios Manual

L I F E B O O K E / P / S / U B I O S G u i d e
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through
the Setup Utility on page 2 for more information.)
Info System
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
F1 Help
ESC Exit
Table 19: Fields, Options and Defaults for the Exit Menu
Menu Field Model
Exit Saving All
Changes
Exit Discard-
ing Changes
Load Setup
Defaults
Discard
Changes
34
Phoenix SecureCore(tm) Tiano Setup
Advanced Security
Select Item -/+ Change Values
/
Select Menu Enter Select ► Sub-Menu
/
Figure 19. Exit Menu
Description
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the
BIOS memory, then exit the utility. A confirmation message Save Configuration
changes and exit now? [Yes][No] is displayed.
Selecting Exit Discarding Changes and Exit will exit the setup utility without writing to the BIOS
memory. When the BIOS recognizes this selection it will reboot, load the operating system and
begin operation.
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then
display the message Load default configuration now? [Yes] [No]. When con-
firmed the setup utility will return to the Exit Menu. To return to another menu follow the direc-
tions in the Navigating Through the Setup Utility Section.
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The
message Load previous configuration now? [Yes] [No] will be displayed.
When confirmed the setup utility will return to the Exit menu. To return to another menu, follow
the directions in the Navigating Through the Setup Utility Section.
The following table shows the names of the menu
fields for the Exit menu, the default settings and a
description of the field's function and any special
information needed to help understand the field's use.
Boot Exit
Exit System Setup and
save your changes to
NVRAM.
Shift + 1 Enable or disable(!)
F10 Save and Exit
Item Specific Help