Link Status - Option 6 - D-Link DI-1135 Reference Manual

24
X.25 Menus: WAN Set-Up Menu

Link Status - Option 6

Choosing this option displays the link status and statistics for the link.
Device: DEV050607
Link State : Multipoint, Enabled, Up, X.25, Compressing, Unconditional
Routing cost : 156 (Default: 156, Assigned: auto)
Interface State
Speed : 56000 bps
Type : RS530 DTE
Clock : External
DTR : up
RTS : up
DSR : up
CD : up
RI : up
Rcv 25% 14.0KB
Xmt 50% 28.0KB
Type: [s] to redraw, [=] main menu, any other key to end.
Link State :
Multipoint, Enabled/Disabled, Up/Down/Starting/Stopping, Compressing/NonCompressing,
Conditional/Unconditional.
Routing Cost :
The default auto cost changes according to the link speed used. When the link is not up, this line will not appear.
Speed :
This displays the speed of the link. The speed will be as set on the DCE device (synchronous modem). The
speed displayed may not be the same as the actual speed of the DCE device: The speed displayed will be the
closest lower default speed (e.g. a speed of 168K will display as 128K). If the DCE is disconnected, no speed (0)
will be shown.
Type :
The interface type is identified in this display (RS530, V.35, RS232, V.11). Each interface is a physical DTE.
Clock : External
In the environment expected for this bridge/router, the respective DCEs will supply clock, so, the clock will be
External for each bridge/router.
Link 1 Status
Frame Counts (Rcv/Xmt)
Bytes : 200544/177535
I : 5987/8972
RR : 18898/20653
RNR :
SABM :
DM :
UA :
DISC :
REJ :
FRMR :
Throughput
|************
|*************************
|----|----|----|----|----|----|----|----|----|----|
0 10 20 30
DI-1135 X.25 Bridge/Router Menu Reference Manual
Frame Errors
Invalid
CRC
Rcv abort
0/0 Overrun
0/0 Rcv miss
0/0 Too large
0/0 Misaligned : 0
0/0 Re-Xmt
0/0 Underrun
0/0
40 50 60 70
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
80 90 100%