Output Peq; Output Dynamics - dbx Zone Pro 640 User Manual

™
ZonePro
Section 4
Detailed Parameters
4.12 - Output Parametric EQ
The ZonePro units offer parametric EQ on all inputs. A 4-Band PEQ is available on the Mic/Line
inputs while a 2-Band PEQ is available on the RCA line inputs.
EQ On/Off
Turns the PEQ on and off.
Type Low Shelf, HighShelf, Low/High Shelf and Bell
The Type selector allows you to select either a Low, High, Low/High shelf or Bell EQ curve.
Flat /Restore
These buttons either flatten (Flat) or restore (Restore) all bands to their original settings.
Band (1-6) Frequency 20Hz to 20kHz (Low Shelf)
Selects the frequency of the low pass shelf parametric EQ.
Q (1-6) 0.105 to 16.0
Q is adjustable from 0.105 to 16.000
Slope (Type: High and/or Low Shelf Selected) 3-12dB/Octave
Sets the slope of the High and/or low shelf parametric EQ.
Level (1-6) -12 to 12 dB
Sets the overall level of the selected parametric EQ frequency.

4.13 - Output Dynamics

The ZonePro™ units offer a dedicated output dynamics module which includes Compression,
Limiting and Auto Gain Control. The Output Dynamics are located on each output channel and
have been strategically placed for speaker and amplifier protection. Note: Compression para-
meters are explained in sub section 4.5, and AGC parameters are explained in sub section 4.3.
®
ZonePro ™ User Manual
30