Configuration Utilities; Awcleap.exe - Cisco Aironet Wireless LAN Client Installation And Configuration Manual

DOS Utilities

Configuration Utilities

AWCLEAP.EXE

Description
Syntax
Options
Standard Options
(Default settings in
brackets)
Remarks
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
4-6
Sets the LEAP username and password
AWCLEAP [username|noname] password [-clear] [-d]
username Sets a username
-noname Disables the username feature
password Sets a LEAP password
-clear Clears current username and password
-d Displays current settings
-p[I0 base] IO base address (hex) [380]
-io#|-misa#|-isa# IO type, #={8|16}
-b [membase] Memory base address (hex) [D000:0]
-I [irq] Interrupt request (decimal) [5]
-s [slot] Slot number (decimal) [0]
-365 82365 card startup
-pci PCI card startup
-nocheck I/O access not tested on startup
The card startup option (-365) is required to run this utility.
This utility is not shipped with the drivers. To obtain it, contact your
local Cisco System Engineer.
Chapter 4 Utilities
OL-1744-02