Sony LMD-1751W Operating Instructions Manual
User manual (lmd1751w operation manual)
Hide thumbs
Also See for LMD-1751W:
- User manual (4 pages) ,
- Brochure (4 pages) ,
- Operating instructions manual (84 pages)
Related Manuals for Sony LMD-1751W
Summary of Contents for Sony LMD-1751W
-
Page 1: Lcd Monitor
4-143-463-13 (1) LCD Monitor Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. LMD-2451W LMD-1751W © 2009 Sony Corporation... - Page 2 The model and serial numbers are located at the rear. Record these numbers in the spaces provided below. Refer to these numbers whenever you call upon your WARNING Sony dealer regarding this product. THIS APPARATUS MUST BE EARTHED. Model No. ____________________ WARNING Serial No.
- Page 3 outlet is provided with a suitable protective earth uses, and can radiate radio frequency energy and, if not connection. installed and used in accordance with the instruction manual, may cause harmful interference to radio 3.Internal air ambient temperature of the rack communications.
- Page 4 E3 (urban outdoors), E4 (controlled EMC environment, ex. TV studio). For the customers in Europe The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized Representative for EMC and product safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
-
Page 5: Table Of Contents
Table of Contents Precaution .............. 6 On Safety ............6 On Installation ............ 6 Handling the LCD Screen ........6 About the Fluorescent Tube ....... 6 On Cleaning ............6 On Repacking ............. 7 On Mounting on a Rack ........7 On Fan Error ............ -
Page 6: Precaution
It is dangerous to use the unit with a becomes dark, unstable or does not turn on, consult your damaged power cord. Sony dealer. • Unplug the unit from the wall outlet if it is not to be used for several days or more. -
Page 7: On Repacking
Because of precise image, wide viewing angle technology and high speed response, real color image If you have any questions about this unit, contact an can be reproduced. authorized Sony dealer. Multi-format The monitor supports the video, Y/C, RGB, component, On Fan Error SDI (3G/HD/SD, when the optional input adaptor is used.) signals and NTSC/PAL color systems. - Page 8 You can select the height of the monitor by adjusting the APA (Auto Pixel Alignment) function height. For the signal input to the HD15 input connector, you can adjust the picture to the appropriate size simply by For more information, refer to “Adjusting the Height of pressing the button assigned as the APA function.
-
Page 9: Location And Function Of Parts And Controls
Location and Function of Parts and Controls Front Panel COMPOSITE – COMPONENT – – – HD15 – – a Tally lamp f CONTRAST buttons You can check the status of the monitor by the color of Adjusts the picture contrast. the tally lamp. -
Page 10: Function Buttons
+/– buttons MARKER, H/V DELAY, MULTI DISPLAY, CLOSED Press to select the items and setting values. CAPTION, APA and I/P MODE in FUNCTION ENTER button BUTTON SETTING of the USER CONFIG menu (see Press to confirm a selected item on the menu. page 29). -
Page 11: Input Signals And Adjustable/Setting Items
Input Signals and Adjustable/Setting Items Input signal Item Video* B & W* Component* RGB* Computer Y/C* HD15 CONTRAST* BRIGHT* CHROMA* × × × × × × × × × × × PHASE* (NTSC) APERTURE COLOR TEMP COLOR SPACE AUTO CHROMA/ ×... -
Page 12: Rear/Bottom Panel
DISPLAY” on page 26, “MARKER ENABLE” on page 27, *10 When a BKM-244CC is installed, closed captions are and “MULTI DISPLAY ENABLE” on page 28). displayed. *9 The signal can only be selected in the main display (see *11 When a BKM-250TG is installed, the signal is input. “SUB INPUT SELECT”... - Page 13 SERIAL REMOTE connector (RJ-45) When this unit operates on an external sync signal, connect the reference signal from a sync generator Connect to the network or Sony BKM-15R Monitor to this connector. Control Unit by using a 10BASE-T/100BASE-TX LAN cable (shielded type, optional).
-
Page 14: Installing To The Rack (Lmd-1751W Only) (Using Mb-530)
Installing to the Rack Adjusting the Height of (LMD-1751W only) the Stand (using MB-530) LMD-2451W comes equipped with a stand. LMD- 1751W can be mounted on the optional SU-561 Monitor You can attach the LMD-1751W monitor to the rack by Stand. - Page 15 Attach the stand attachment bracket with four Remove four screws to remove the stand screws. attachment bracket. Use the screws removed in step 5 of “To remove the stand attachment bracket”. Attach the arm. Hang the hook of the bracket for using the A screw holes.
-
Page 16: Connecting The Ac Power Cord
Connecting the AC Installing the Input Power Cord Adaptor Plug the AC power cord into the AC IN socket on Before installing the input adaptor, disconnect the power the rear panel. Then, attach the AC plug holder cord. (supplied) to the AC power cord. Remove the panel of the optional input slot. -
Page 17: Selecting The Default Settings
Selecting the Default Settings – – When you turn on the unit for the first time after – purchasing it, select the area where you intend to use this unit from among the options. – – The default setting values for each area –... -
Page 18: Selecting The Menu Language
2 If LATIN AMERICA is selected: Selecting the Menu PAL&PAL-N area Language L A T I N A M E R I C A P A L & P A L - N A R E A Argentina A R G E N T I N A P A R A G U A Y Paraguay U R U G U A Y... -
Page 19: Using The Menu
The setting items (icons) in the selected menu are Using the Menu displayed in yellow. USER CONFIG – SYSTEM SETTING The unit is equipped with an on-screen menu for making M AT R I X : C O M P O N E N T L E V E L : xxxx various adjustments and settings such as picture control, N T S C S E T U P :... - Page 20 The menu icon presently selected is shown in About the memory of the settings yellow and setting items are displayed. The settings are automatically stored in the monitor memory. USER CONFIG – SYSTEM SETTING M AT R I X : C O M P O N E N T L E V E L : xxxxx N T S C S E T U P :...
-
Page 21: Adjustment Using The Menus
USER CONFIG Adjustment Using the SYSTEM SETTING MATRIX Menus COMPONENT LEVEL NTSC SETUP SCAN FORMAT DISPLAY Items LANGUAGE POWER SAVING The screen menu of this monitor consists of the I/P MODE following items. BACKGROUND MARKER SETTING STATUS (the items indicate the MARKER ENABLE current settings.) MARKER SELECT... -
Page 22: Adjusting And Changing The Settings
For the DVI/HD15 input Adjusting and Changing the Settings STATUS 1/2 F O R M AT xxxxxxx STATUS menu xxxxxxx xxxxx The STATUS menu is used to display the current status C O L O R T E M P xxxx of the unit. -
Page 23: User Control Menu
For the video input Submenu Setting COLOR TEMP Selects the color temperature from USER CONTROL 1/3 among D65, D93 and USER AU T O C H R O M A / P H A S E settings. AU T O A D J VA L U E : S TA R T : MANUAL If you set the COLOR TEMP to... - Page 24 For the DVI/HD15 input Submenu Setting SUB CONTROL Adjusts finely the adjustment range * The 1/3 menu cannot be adjusted. of the button on the front panel for CONTRAST, BRIGHTNESS, CHROMA and PHASE. USER CONTROL 2/3 • CONTRAST: Adjusts the picture S U B C O N T R O L contrast.
-
Page 25: User Config Menu
USER CONFIG menu Submenu Setting The USER CONFIG menu is used for setting the PICTURE CONTROL Adjusts to monitor the picture more clearly. system, marker, multi display, function button, closed • SIZE H: Adjusts the horizontal caption, audio and option. size of the picture. - Page 26 Submenu Setting Submenu Setting SCAN Enables setting of the scan mode by I/P MODE (picture delay Selects to set the delay by the the button which the scan function minimum) picture processing to the minimum is assigned. Select from among level when the interlace signal is “STANDARD”...
- Page 27 – 645 × 484 (480i, 480P) LMD-2451W: LMD-2451W: 768 × 576 (575i, 576P) 1920 × 1134 1680 × 1200 LMD-1751W: LMD-1751W: 1280 × 720 1024 × 768 The image is scaled horizontally to display in an aspect ratio of 4:3. MARKER SETTING –...
-
Page 28: Multi Display Setting
Submenu Setting Submenu Setting SAFETY AREA Selects the safe area size for the MULTI DISPLAY • PIP/POP: The sub display is put in aspect ratio determined by the the main display for the 16:9 display button which the aspect function is and by the side of the main display assigned. -
Page 29: Function Button Setting
ASPECT Submenu Setting Press the button to set the aspect ratio of the picture, 4:3 POSITION Sets the position of the sub display. You or 16:9. can select from among 1 to 3 for the 4:3 display and 1 to 4 for the 16:9 display. 4:3 display Note •... -
Page 30: I/P Mode
Submenu Setting Note BKM-244CC Sets closed caption. If the APA operation does not finish correctly depending • TYPE: Selects the closed caption on the input signal, adjust DOT PHASE (page 25). signal format. •708: To display a closed caption I/P MODE signal conforming to the EIA/ CEA-708 standard. -
Page 31: Background
Submenu Setting Submenu Setting INPUT SELECT Selects the input audio signal. ALM DISPLAY Selects ON to display the ALM (audio • ALL: The sound except from level meter) display and OFF not to BKM-220D/243HS/244CC/ display. 250TG is output. The indications of the audio level signify •... -
Page 32: Remote Menu
Submenu Setting Submenu Setting POSITION Sets the position of the time code display. PARALLEL REMOTE Selects the PARALLEL REMOTE You can select between 1 and 2. connector pins for which you want • 1: Bottom to change the function. • 2: Top You can assign various functions to 1 to 4 pins and 6 to 8 pins. -
Page 33: Key Inhibit Menu
You can lock the setting so that they cannot be changed Submenu Setting by an unauthorized user. SERIAL REMOTE Selects the mode to be used. Select OFF or ON. • OFF: SERIAL REMOTE does If you set to ON, all items are displayed in black, not function. -
Page 34: Troubleshooting
Troubleshooting Specifications Picture performance This section may help you isolate the cause of a problem and as a result, eliminate the need to contact technical LCD panel a-Si TFT Active Matrix support. Pixel efficiency 99.99% • The display is colored in green or purple t Select Viewing angle (up/down/left/right, contrast >... - Page 35 Plug & Play function: corresponds to LMD-1751W: Maximum: approx. DDC2B 77 W (when two BKM-229X are DVI input connector installed) DVI-D (1) Peak inrush current TMDS single link (1) Power ON, current probe method: Remote input connector 23 A (100 V), 56 A (240 V) Parallel remote (2) Hot switching inrush current, Modular connector 8-pin (1)
-
Page 36: Available Signal Formats
Pin number Signal Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT Available signal formats NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS The unit is applicable to the following signal formats. - Page 37 Available HD15 input signal formats VESA DMT Sync. polarity Dot clock Resolution LMD-2451W LMD-1751W [MHz] [kHz] [Hz] Horizontal Vertical 640 × 480 60 Hz 25.175 31.469 59.940 Negative Negative 800 × 600 56 Hz 36.000 35.156 56.250 Positive Positive 800 × 600 60 Hz 40.000 37.879 60.317...
- Page 38 Others Sync. polarity Dot clock Resolution LMD-2451W LMD-1751W [MHz] [kHz] [Hz] Horizontal Vertical 720 × 400 70 Hz 28.322 31.469 70.087 Negative Positive 1280 × 800 60 Hz 68.900 48.935 59.969 Negative Negative a : Available – : Not available Available DVI input signal formats Range of DVI input signal (LMD-2451W) (available to 1920 ×...
-
Page 39: Dimensions
Mass (with monitor stand): Dimensions Approx. 11.0 kg (24 lb 4 oz) (when no input adaptor is installed) Approx. 11.4 kg (25 lb 2 oz) (when two BKM-229X are installed) LMD-2451W LMD-1751W Front 602.4 (23 Front CONTROL COMPOSITE 439.5 (17 VOLUME –... - Page 40 When attached to optional SU-561 Monitor Stand Side 5 ˚ * 10 ˚ * 105.0 (4 269.9 (10 Unit: mm (inches) *Tilt angle Mass: Approx. 6.3 kg (13 lb 14 oz) (when no monitor stand and no input adaptor is installed) Approx.
- Page 41 Sony Corporation...