Rout Specifies That The Lan Connection Is; To Pass Routed - Motorola 68230 - Vanguard 300 DSU/CSU Operator's Manual

Step Action
From the Configure menu, select LAN Connection
1
Table. Then: Configure the following.
Prompt:
Entry Number:
LAN Forwarder
Type:
Router Interface
Number:
EncapsulationType: CODEX
Autocall
mnemonic:
Remote Connection
ID:
From the Configure menu, select Configure Router ->
2
Configure Interface States. Then: Configure the
following.
Prompt:
Interface #1 State:
Interface #6 State:
Enter: Result/Description
1 References this
node's table record.
ROUT Specifies that the
LAN connection is

to pass routed

traffic.
6 Specifies a router
interface that is
using this LAN
connection record.
Specifies the type
of encapsulation
used over this LAN
connection.
LAN100 Specifies the
mnemonic name
used when this
LAN connection
record initiates the
autocall.
2 Identifies which
record in the
remote LAN
connection table to
connect to.
Enter: Result/Description
Enabled Enables the router
interface.
Enabled Enables the router
interface.
Result/Description
The LAN
Connection table
appears.
The Configure
Interface States
menu appears.