Table of Contents
Advertisement
6
Communications
³
4
1
5
³
4
1
5
³
9
9
9
³
5
1
5
³
5
1
5
³
9
9
9
³
4
1
5
³
9
9
9
³
4
1
5
³
4
1
5
³
9
1
7
³
4
1
5
† Applicable for IBM
Enable Light Pen/Wand Communication –
Use this option if scanner should be used in
5
2
4
place of a light pen.
* Enable RS232 – The scanner will work with
RS232 +/- 12V serial output.
5
5
4
Load Keyboard Wedge Defaults – Scan this
code before selecting Normal or Stand Alone
9
9
4
Wedge Mode.
Enable Stand-Alone Keyboard Scanner –
Allows scanner to be used without an external
5
1
5
3
keyboard.
Enable Keyboard Wedge Emulation – Select if
the scanner provides keyboard emulation by
5
1
4
3
converting the scanned bar code data to the PC
keyboard scan code equivalent.
Load OCIA Defaults – Scan this code before
selecting Enable OCIA output.
9
9
3
Enable OCIA Output – Select this option if the
communications requirement is on Optically
5
4
4
Coupled Interface Adapter (OCIA). This is a
docked (by the host) serial interface.
Load RS485
9
9
5
Enable RS485 Communication – Select this
option for RS485 SIOC/RS485 communications.
5
0
4
Not all scanners support this interface. The
correct interface board is required.
Enable No Communication Mode – Select this
option if the scanner does not interface with the
5
3
4
host device.
Reserved
5
0
0
Reserved
5
6
4
®
Host applications.
†
Defaults
6–1
Hide quick links:
Advertisement
Table of Contents
