Cisco ONS 15327 Manual page 25

Improved GUI on Circuit Creation Wizard
A panel was added to the Circuit Creation Wizard to record entries from previous pages. This panel is
visible during the selection process and displays user selections.
Network Topology Map
In Release 3.3, you can use a Zoom command to change the network topology map display:
•
•
•
•
Common Security Profiles
CTC allows user security information (userid, password, permissions) to be shared across the nodes it
manages:
•
•
Multiple Circuit Creation
You can define multiple circuits between the same nodes in one easy step using the Number of Circuits
field in the Circuit Provisioning Wizard.
CTC Managed Software Download
CTC Managed Software Download allows you to download CTC software to multiple nodes serially and
in parallel.
Note Cisco advises that you limit concurrent software downloads to 3 nodes at once.
Directional Arrows on Circuit Maps
Arrowheads have been added to circuit lines displayed on the circuit map to distinguish unidirectional
and bidirectional circuits.
CTC Enhancements
The following features are new for CTC in Release 3.3.
OL-2671-01
You can store a preferred zoom configuration as the default map view.
When you zoom in or out, nodes are repositioned so that DCC spans do not overlap. DCCs are
clearly delineated while nodes retain their geographic positions (as placed by the user or
longitude/latitude coordinates).
With zooming, it is possible to see and select one of up to ten DCC spans.
The size of the ONS 15327 icon has been reduced to allow for more nodes in a view.
You can set SNMP community strings and access privileges.
You can perform user management operations (such as creating a user or changing a password) at
the network level. When a change is made on this screen, it applies to all CTC-managed nodes.
New Features and Functionality
Release Notes for Cisco ONS 15327 Release 3.3
25