Installation - Kenmore 625.385010 Owner's Manual

PLAN YOUR INSTALLATION
It is recommended to read through the entire manual
before beginning your installation. Follow all steps
exactly. Reading this manual will also help you get all
the benefits from your system.
TYPICAL UNDER SINK LOCATION
The Advanced Two-Stage Drinking Water Filter housing is
normally located under the kitchen and/or bathroom sink,
to filter the cold drinking water. See Figure 2.
CHECK SPACE REQUIREMENTS
Check size and position of items for proper installation
into location chosen.
TOOLS NEEDED
Review the tools needed list. See Figure 1. Gather need-
ed tools before proceeding with the installation. Read
and follow the instructions provided with any tools listed
here.
IMPORTANT: A 1-1/4" dia. hole is needed to mount the
filtered water faucet. To avoid damaging the sink, con-
sult a qualified plumber or installer for drilling proce-
dures in porcelain or stainless steel.
Tools Needed
Phillips Screwdriver
Adjustable Wrench
Drill & 1-1/4" bit, if required
Large Adjustable Jaw Pliers or Pipe Wrench
)
Figure 1
Typical Under Sink Installation
filtered water
faucet
SINK
blue tubing
WATER OUT
cold water
supply fitting yellow tubing
WATER IN
cold shutoff
/ / /
//
//
Filter Housing may be placed horizontally OR vertically
Figure 2
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
5