Installation; Required Tools - Kenmore 253.4474 Use & Care Manual

installation
Required Tools
You will need the following tools:
Components Provided:
Top Hinge Top Hinge
Cover Front Cover Rear
s . ... ....
st-ine ge Lsl-!rn_r_
Tools Necessary:
_% oR
Head
3/8"Fixed
Wrench
This Use & Care Guide provides general installation and
operating instructions for your model. We recommend
using a service or Idtchen contracting professional to install
your refrigerator. Use the refrigerator only as instructed
in this Use & Care Guide. Before starting the refrigerator,
follow these important first steps.
Locafion
° Choose a place that is near a grounded, non-GFCI,
electrical outlet. Do Not use an extension cord or an
adapter plug.
• If possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher, or other heat
sources.
• The refrigerator must be installed on a floor that is
level and strong enough to support a fully loaded
refrigerator.
_ CAUTION
Do not install the refrigerator where the temperature
will drop below 55°F (13°C) or rise above 110°F (43°C).
The compressor will no| be able to maintain proper
|empera|ures inside |he refrlgera|or.
Do not block the kick pla|e on the lower front of your
refrigerator.
Su_clen| air clrcuJa|ion is essential for |he
proper operation of your refrigerator.
Installation
* Allow the following clearances for ease of installation,
proper air circulation, and plumbing and electrical
connections:
Sides & Top 3/8 inch (9.5 mm)
Back 1 inch (25.4 mm)
NOTE
If your refrigerator is placed with the door hinge side
against a wall, you may have to allow additional space
so the door can be opened wider.
0mm)
Refrigerator
3/8"
(10mm)
7