Sony TV Receiver NSZ-GT1 Quick Setup Manual page 2

Preparation
Connection
In the Box
D
Internet TV Box (1)
D Keypad (1)
D Size AA batteries (2)
D
HOMI cable (1)
D
IR Blaster cable (1)
Connect the Internet TV Box
Connect the unit between the TV and Cable/Satellite Box using
the HOMI cable,
To use an AV Receiver
Connect the unit to an AV Receiver instead of the TV using the
HOMI cable,
Connect the IR Blaster
Connect the IR Blaster to control the Cable/Satellite Box,
Place the IR Blaster near the remote sensor of the Cable/Satellite Box,
To use an AV Receiver
You can control an AV Receiver by connecting the IR Blaster to it.
OJ
Connect to a network
When using wired connection, connect the unit and a router with a LAN cable. When
using wireless connection, you need to set the Network Setup in the Initial Setup
Wizard (on step 7),
• For details on making a network connection with the Cable/Satellite Box,
see the operating i~structions supplied with the Cable/Satellite Box,
1
00
c=J
Cable/Satellite Box
TV
• Nolsupplied
~ ~
",-I
n ~te!J"""r_n_et",""!T~V~B~o~x~~~~~_~~'f!!!fJ) ~ ~:': ~
*LAN cable or :Wireless LAN
~
Router
~
Place the IR Blaster so that the infrared
:"'" ", transmitter points to the remote sensor of
", ::. the Cable/Satellite Box, For details on the
IR Blaster, see "Help Guide" on the back
side,
__---11
Internet TV Box
TV
• You can control a Cable/Satellite Box via the Home Network depending on your Cable/Satellite TV
provider, For details, see "Help Guide" on the back side.
Router
HDMI~:~J
OUT~I~IIIIIIIIIIII'~
Internet TV Box
TV
.HDMI~:~]
OUT~
F
o =o===='4
• Nolsupplied
D
AC power cord
(1)
,
D
AC adapter (1 )
D
Quick Setup Guide (1)
D
Reference Guide (1)
D Warranty card (1)
D
End User License
Agreement (1)
Inserting batteries
AA-size (R6)
om
If your connection method differs from that shown above, see "Help Guide" (http://esupport.sony.com/internettv/hel 19Uide/). For details on "Help Guide," see the back side.