Honeywell ADEMCO LYNXR-I Security System User Manual page 39

LYNXR-I Speaker Phone Functions
To place a call using the Speaker Phone:
To answer a call using the Speaker Phone:
To flash (switch between two calls using call waiting):
OFF
To hang up:
To activate/deactivate (toggle) ringer:
To return the keypad to telephone mode after disarming the system:
NOTES: (1) The speaker phone ringer can only be enabled/disabled when the speaker phone mode is not active.
The system will ring once to confirm the ringer is enabled. Entering
second time will disable the ringer. No ring will confirm that the ringer is disabled.
(2) The speaker phone ringer will not ring when an alarm, trouble or entry/exit delay are sounding.
(3) The LYNXR-I speaker phone does not provide a "hold" feature.
USER FUNCTIONS
Speaker Phone Feature
[#] + AUX and dial the desired phone number.
[#] + AUX
AUX
[#] + VOLUME + AUX
– 39 –
NOTE
If you are using pulse (rotary)
dialing, allow enough time for the
LYNXR-I to finish dialing the
last digit you dialed,
dialing the next digit.
[#] + AUX
[#] + VOLUME + AUX
before
a