Installing The Cooktop; Protect Surface Of Cooktop; Attach Brackets To Cooktop - Kenmore 42414 Installation Instructions Manual

Installation Instructions
INSTALLING THE COOKTOP
[] INSTALL JUNCTION BOX
Install an approved junction box where it will
be easily reached through the front of the
cabinet where the cooktop will be located.
The cooktop conduit is 3 feet long.
116"
Min.
Install junction box so
that it can be reached
through the front of
the cabinet.
h
IMPORTANT:
The junction box must
be located where it will allow considerable
slack in the conduit for serviceability.
[] PROTECT SURFACE OF
COOKTOP
Place a towel or tablecloth onto the
countertop. Lay the cooktop upside down
onto the protected surface.
Bottom of cooktop
Cloth under Cooktop
[] ATTACH FOAM TAPE
(glass maintop models only)
Apply the foam tape around the outer edge
of the glass. Do not overlap the foam tape.
Bottom of Cooktop
Foam Tape J-J__
Glass
[] LOCATE MOUNTING PARTS
Remove the Hold-Down Brackets and screws
from the literature package.
Mounting Screw
[] ATTACH BRACKETS TO
COOKTOP
Screw the Hold-Down Bracket to the side of
the cooktop unit. Repeat for opposite side of
cooktop.
Bottom of Cooktop
Cooktop Glass
Pre-Drilled Hole
Foam Tepe
Hold-Down
Bracket
5