Iso - GE G Owner's Manual

ISO
The ISOfunction allows you to set the camera
sensor sensitivity to light. To improve the
performance in darker environments, a higher
ISOvalue is required. On the other hand, a
lower ISOvalue is needed when in bright
conditions.
(The ISOsetting is only available when the
camera is in the OH Manual mode).
To set the ISOvalue, do the following:
1. Press the Q button to enter the Function
menu.
2. Use the Left/Right navigation buttons to
highlight the ISO function.
Higher ISOpictures will naturally have
more noise then lower ISOpictures.
3. Use the Up/Down navigation buttons to
select the desired ISOvalue from Auto, 64,
80,100, 200, 400, 800, or 1600.
4. Press the Q button to confirm your setting.
5. Use the Left/Right buttons to select other
options, or press the _ button once to
confirm your selection and exit the current
menu.