FLEXIDOME HD VR
5.6
Camera positioning and field-of-view
The camera module position can be adjusted along three axes
and several zoom positions can be selected.
To help position the camera and set the field-of-view:
1.
2.
3.
4.
CAUTION!
Do not expose the sensors to direct sunlight.
Bosch Security Systems
Connect a monitor to the 2.5 mm jack using the optional
monitor cable (S1460) which provides a CVBS signal (for
installation purposes only).
Apply power to the camera.
After power-up, wait a little (about 20 seconds).
Press the Menu button. This stops the IP video stream and
enables the service video analog output.
S1460
Installation Manual
Installation | en
FoV
AM18-Q0637 | v1.1 | 2013.08
27