Dell PowerEdge Expandable RAID Controller 3 User Manual page 209

Ta b l e 1 3 - 2 . B I O S B o o t E r r o r M e s s a g e s (continued)
Message
X Logical
Drives Degraded
1 Logical Drive
Degraded
Insufficient
memory to run
BIOS. Press any
key to
continue...
Insufficient
Memory
The following
SCSI IDs are
not responding:
Channel x:a.b.c
Problem Suggested Solution
x number of logical Make sure all physical drives
drives signed on in a are properly connected and
degraded state. are powered on. Run the
BIOS Configuration Utility
to find whether any physical
drives are not responding.
Reconnect, replace, or
rebuild a drive that is not
responding.
A logical drive signed Make sure all physical drives
on in a degraded state. are properly connected and
are powered on. Run the
BIOS Configuration
Manager to find out if any
physical drives are not
responding. Reconnect,
replace, or rebuild any drive
that is not responding.
Not enough PERC 3 Make sure PERC 3 cache
memory to run PERC memory has been properly
3 BIOS. installed.
Not enough memory Make sure PERC 3 cache
on the PERC 3 memory has been properly
adapter to support the installed.
current configuration.
The physical drives Make sure the physical drives
with SCSIO IDs a, b, are properly connected and
and c are not are powered on.
responding on SCSI
channel x.
207
Trou ble sho oting