Reversing The Door Handles - GE GTM18GBEES Use And Care Manual

REVERSING THE HARDWARE
4
4.2 Interchange hinge and screws at top right with
screws at top left of cabinet. Do not tighten screws on
hinge side at this time.
Installing the hinge
on the left.
NOTES:
for installing the hinge depends on which side you
install the hinge.
the edge of the case for correct installation.

REVERSING THE DOOR HANDLES

5
5.1 Transfer fresh food door handle
5.1.1 Remove the handle plug using a tape-tipped
putty knife under the edge, and remove the
screw underneath. Remove the two screws
holding the handle to the top of the door.
Plug
5.1.2 Remove the handle.
Installation Instructions
(CONT.)
Installing the hinge
on the right.
Top
REVERSING THE DOOR HANDLES
5
5.1.3 Remove plug button from the top hinge hole on the
left side of the door and insert it into the hole on the
opposite side that was vacated by removal of the top
hinge.
Plug Button
5.1.4 Pull the plug button from the front of the door and
transfer it to the opposite side.
5.2 Transfer door stop
5.2.1 Move the plastic door stop and screws from
the right side to the left side.
Plastic Door Stop
Left Side
5.3 Reinstall fresh food door handle
5.3.1 Attach the handle to the right side of the
door with screws at the top
and under the handle plug.
5.3.2 Reinstall the handle plug.
13
To reattach the
handle on the
Plug Button
opposite side.
Right Side
(CONT.)