Welcome Need more ideas for iron-on labels? ■ Try using decorative-edge scissors to Your LabelWorks Iron-on Kit lets you create shape your labels. attractive, long-lasting labels for uniforms, ■ clothing, backpacks, and other fabric items. Personalize baby shower gifts. ■...
Getting Started 2. Insert 6 AAA alkaline batteries, positioning the + and - ends as shown. Your Label Works printer requires 6 AAA batteries (not included). An optional AC adapter is also available (APT0615Z1-1). Follow the instructions in this section to insert the batteries and tape cartridge, and change the language if necessary.
Using the optional AC adapter Inserting a tape cartridge 1. Plug one end of the AC adapter into the 1. Remove any slack from the ink ribbon. product. 2. Plug the other end of the AC adapter into a wall outlet. Remove the rear cover.
4. If there is excess tape, feed the end of the Removing a tape cartridge tape through the tape guide slot. 1. Remove the rear cover. 2. Hold the cartridge by the tabs, and lift it straight up. 5. Replace the cover and snap it into place. 6.
Creating labels Adding punctuation You can select from two groups of You can create labels with text, symbols, and punctuation marks, as shown below: frames in a variety of fonts and styles. Group 1 ; ( ) < > [ ] { } Entering text Group 2 Use the built-in keyboard to enter letters and...
Adding letters with an accent mark Note: To cancel and return to the previous menu, press You can choose from a list of accented letters Tip: For young children, try using animal labels on the display. to help them match clothing. 1.
Adding frames Frames include borders and fun symbols for activities and special occasions. 1. Press to display Frame, then press to select it. 2. Press to scroll through the options, then press or enter the frame number to select the frame you want to use. You can choose from the following frames: Creating labels...
Changing the font size Changing the font You can change the size for the letters, Go from simple to ornate, and create the numbers, and symbols on your label. right impression for each label. 1. Press 1. Press 2. Press to select a 1-line or 2-line layout, 2.
Saving labels Changing the font style Personalize your labels with italic, shadow, You can store up to 30 saved labels at a time. and outline effects. After you finish creating your first label, press 1. Press to create another label (the label 2.
Printing labels Printing multiple copies You can print up to 9 copies of a label at the 1. Press to print the current label. same time. The length of the label and the number of copies shows on the display while the 1.
Customizing your labels Using mirror-image text Create unique labels with mirror-image text You can customize your labels by creating and symbols. special effects, such as vertical and mirrored text. You can also print sequentially numbered labels or custom lengths. In addition, you can adjust the font width, 1.
Creating sequentially numbered Customizing the length of labels labels You can create extra-long or short labels. You can create a label, and then print 1. Press numbered copies of it. 2. Press until you see Label length, then press to select it. A-1 A-2 A-3 3.
Adjusting the Display 3. Press to change from Narrow to Wide, then press You can adjust the following display settings: Selecting narrow characters Contrast: Adjusts the density of the fonts on the display. You can change from normal characters and symbols to narrow ones.
Applying Iron-On labels Attaching your labels Press the entire label firmly, avoid the steam Use only label cartridges with this mark: vents, and do not use a press cloth. You can attach labels to the following types 1. Set your iron to 284–320 °F (140–160 °C), of fabric: without steam.
■ Label usage tips When attaching a label to fabric that may be frequently washed or dry-cleaned, it is ■ Labels are made from non-toxic recommended that the label be sewn on. materials; however, attached labels are ■ When using a steam iron, turn the steam stiff, and may rub or scratch the skin if off when ironing on the label.
Cleaning the Printer Remove the tape cartridge and clean the print head using a cotton swab moistened Use a dry, soft cloth or, for stubborn stains, a with rubbing alcohol, as shown below: moist cloth that has been wrung dry. Caution: Never use chemicals or solvents such as benzine, thinner, or alcohol, or use a chemical duster.
If the same Too many lines You have exceeded the maximum message appears, turn the power number of lines (2). Press off again and contact Epson for delete the lines indicated by the technical support. cursor.) Seq. num. only 1 Sequence numbers have already been set.
Problems and solutions Power is on but no images appear on the display Check the solutions below if you are having ■ Make sure the batteries are correctly trouble using your product. seated. The product does not function normally ■ Replace the batteries with new ones, or The product may stop functioning due to use the optional AC adapter...
Page 28
Nothing prints Printing stops in the middle of text ■ ■ Make sure text has been entered. Install a new tape cartridge. ■ ■ Replace the tape cartridge if necessary. Replace the batteries or use the optional AC adapter (APT0615Z1-1). ■...
Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Recycling Epson offers a recycling program for end of life products. Please go to www.epson.com/ recycle for information on how to return your products for proper disposal.
Specifications Purchase supplies and accessories Epson offers a wide array of tapes for Dimensions Width: 5.70 inches (145 mm) multiple uses. For a complete list of available (approximate) Depth: 5.90 inches (150 mm) tapes, including additional widths, visit Height: 2.16 inches (55 mm) epson.com/LW300Tapes.
Notices Continuing to use the product may result in damage or injury. ■ To avoid injury, keep your fingers away from the Safety instructions label exit slot when printing or using the cutter. ■ Avoid locations that are subject to rapid changes in Before using your product, read the following safety heat or humidity, shocks or vibrations, or dust.
Page 32
■ Operate the keyboard gently. with water and seek medical treatment. If a battery is swallowed, seek medical treatment immediately. ■ Take care not to cut your fingers when cutting a ■ label with scissors. When replacing batteries, follow these safety instructions: ■...
Page 33
■ AC adapter Do not place the AC adapter or power cord near a heater. ■ Use only model APT0615Z1-1 AC adapter and ■ power cord with your product. Do not use the AC To avoid fire or electric shock, do not use a adapter with any other equipment and use only damaged AC adapter or power cord.
■ Connect the equipment into an outlet on a circuit Epson is not responsible for any damage or loss caused different from that to which the receiver is by labels or adhesive. connected. ■...
Epson property. The replacement your Epson product prove defective during the product or part may be new or refurbished to the Epson warranty period, please call the Epson Connection at standard of quality, and, at Epson's option, may be (562) 276-7245 (U.S.
Page 36
Epson is not responsible for warranty OR CONSEQUENTIAL DAMAGES RESULTING FROM THE service should the Epson label or logo or the rating label USE OR INABILITY TO USE THE EPSON PRODUCT, or serial number be removed or should the product fail...
This warranty gives you specific legal rights and you may have other rights which vary from jurisdiction to jurisdiction. To find the Epson Authorized Reseller nearest you, visit our website at http://www.epson.com. To find the Epson Customer Care Center nearest you, visit http://www.epson.com/support.
Page 39
Display Turn on/off Print Preview Add symbols Add a frame or Delete other special effect Shift Select/Enter Caps lock Add an accented letter Add a space...
Page 40
Font size Frame Label number The black marks 2-line label Battery level indicate features you are using...