Advanced Ldap Url Syntax; Viewing The Ldap Server List - Dell Powerconnect W-ClearPass Hardware Appliances Deployment Manual

authentication is successful, the operator profile assigned to the username will be displayed. If the authentication
fails, an error message will be displayed. See
about common error messages and troubleshooting steps to diagnose the problem.
Click the Save Changes button to save this LDAP Server. If the server is marked as enabled, subsequent operator
login attempts will use this server for authentication immediately.

Advanced LDAP URL Syntax

For Microsoft Active Directory, the LDAP server connection will use a default distinguished name of the form
dc=domain,dc=com, where the domain name components are taken from the bind username.
To specify a different organizational unit within the directory, include a distinguished name in the LDAP server
URL, using a format such as:
ldap://192.168.88.1/ou=IT%20Services,ou=Departments,dc=server,dc=com
To specify a secure connection over SSL/TLS, use the prefix ldaps://.
To specify the use of LDAP v3, use the prefix ldap3://, or ldap3s:// if you are using LDAP v3 over SSL/TLS.
When Microsoft Active Directory is selected as the Server Type, LDAP v3 is automatically used.
An LDAP v3 URL has the format ldap://host:port/dn?attributes?scope?filter?extensions.
dn is the base X.500 distinguished name to use for the search.
l
attributes is often left empty.
l
scope may be 'base', 'one' or 'sub'.
l
filter is an LDAP filter string, for example, (objectclass=*)
l
extensions is an optional list of name=value pairs.
l
Refer to RFC 2255

Viewing the LDAP Server List

Once you have defined one or more LDAP servers, those servers will appear in the LDAP server list on the
Administration > Operator Logins > Servers page.
.
Select any of the LDAP servers in the list to display options to perform the following actions on the selected server:
Edit—Opens the Server Configuration form, where you can make changes to the properties of the LDAP
l
server.
Delete—Removes the server from the LDAP server list.
l
Duplicate—Creates a copy of an LDAP server. You can then click the Edit link to open the Server
l
Configuration form and use original server's properties as a template for creating a new server.
Disable—Temporarily disables a server while retaining its entry the server list.
l
Enable—Reenables a disabled LDAP server.
l
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide
"LDAP Operator Server Troubleshooting " on page 252
for further details.
for information
Advanced LDAP URL Syntax | 251