Enabling Cisco Discovery Protocol (Cdp); Authorizing Devices To Airwave From Aps/Devices > New Page - Dell PowerConnect W-Airwave User Manual

Table 71 Device Setup > Discover > Discovery Execution Fields (Continued)
Column
Stop
Scheduled
7. Go to the APs/Devices > New page to see a full list of the newly discovered devices that the scan detected.
Figure 70
NOTE: This page is only visible to users with the AMP Administrator role, or roles that have "Allow authorization of APs/Devices"
enabled in AMP Setup > Roles.
Figure 70 APs/Devices > New Page Illustration
What Next?
To authorize one or more devices to a group, see

Page" on
To delete a device altogether from AirWave, select the corresponding check box for each device, and select

Delete.
Dell PowerConnect W thin APs can have Dell PowerConnect W AP Group specified, and Cisco thin APs can

have LWAPP AP Group specified when they are authorized.

Enabling Cisco Discovery Protocol (CDP)

CDP uses the polling interval configured for each individual Cisco switch or router on the Groups > List page.
AirWave requires read-only access to a router or switch for all subnets that contain wired or wireless devices. The
polling interval is specified on the Group > Basic page.
Authorizing Devices to AirWave from APs/Devices > New Page
Once you have discovered devices on your network, add these devices to a group and specify whether the device is
to be placed in Manage Read/Write or Monitor Only mode. To configure a new group, refer to
Using Device Groups in AirWave" on
In Manage Read/Write mode, AirWave compares the device's current configuration settings with the Group
configuration settings and automatically updates the device's configuration to match the Group policy.
Dell PowerConnect W-AirWave 7.4 | User Guide
Description
Displays the date and time the scan most recently completed.
Displays the scheduled date and time for scans that are scheduled to be run.
illustrates this page.
page 111.
page 69.
"Authorizing Devices to AirWave from APs/Devices > New
Discovering, Adding, and Managing Devices | 111
"Configuring and