Procedure
1
Close the display, if it is open, and turn the computer over.
2
Disconnect the antenna cables from the connectors on the Mini-Card(s).
3
Remove the screw that secures the Mini-Card(s) to the connector on the
system board.
1
antenna cables (2)
3
screw
4
Lift the Mini-Card(s) out of the system-board connector.
CAUTION: When the Mini-Card is not in the computer, store it in protective
antistatic packaging. For more information, see "Protecting Against Electrostatic
Discharge" in the safety information that shipped with your computer.
40
|
Removing the Wireless Mini-Card(s)
4
3
2
1
2
Mini-Card
4
system-board connector