Setup > Printer Setup - D-Link DPR-2000 Manual

Using the Web Configurator
SETUP > Printer Setup
To be able to use the printers connected to the Print Server, users must have the
driver programs of the printers installed in their computers. While these programs
are provided by the printers' manufacturers, some of these programs are also
included in the Microsoft Windows network operating system installed in the users'
computers.
The Printer Setup screen allows you to install these driver programs in each of the
computers that want to use the printers connected to the Print Server. Do as follows
to install a printer driver in the user's computer. If all four printers are connected to
your Print Server and the user wishes to use all four of them, repeat this procedure
for each of the printers.
1. Make sure that the Printer Server is connected to the network and running, and
the target printers are connected to the Print Server.
2. From the user's computer, access the Print Server's web configurator. On the left
column of the web configurator's main screen, click Printer Setup to display
following screen:
3. Click Next to display the following Windows Wizard program dialog box:
D-Link DPR-2000 - User Manual 52