GE JK5000SFSS Dimensions And Installation Information

JK5000SF
GE 27" Built-In Single Convection Wall Oven
®
Conduit
40"
Dimensions and Installation Information (in inches)
Note: Cabinets installed adjacent to wall ovens
Conduit
must have an adhesion spec of at least a 194°F
40"
temperature rating.
D
Note: If marks, blemishes or the cutout opening
is visible above the installed oven, it may be
D
necessary to add wood shims under the runners
and front trim until the marks or openings
are covered.
"
Note: Door handle protrudes 3" from door face.
22
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference with
the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
Installation Information: Before installing,
consult instructions packed with product for
current dimensional data.
2 x 4 or
KW Rating
equivalent runners
level with bottom of cutout
240V 3.6
and flush with sides of cutout
or solid bottom floor. 208V 2.7
Breaker Size
240V
20 Amps
208V
20 Amps
Junction box
8-3/4"
MAX.
location
Cutout depth
23-1/2" MIN
22" to
bottom of
Junction box
location
junction box
Cutout width
25" MIN.
22" to 25-1/4" MAX.
bottom of
junction box
Cutout width
25" MIN.
25-1/4" MAX.
B
B
27''
Cabinet
A – Overlap of oven at top of cutout
Cabinet
B – Overlap of oven over side of edges of cutout
A – Overlap of oven at top of cutout
C – Overlap of oven at bottom of cutout
Oven
B – Overlap of oven over side of edges of cutout
D – Overall depth with handle
C – Overlap of oven at bottom of cutout
E – Overall height with trim
Oven
F – Overall width
D – Overall depth with handle
E – Overall height with trim
F – Overall width
For answers to your Monogram
questions, visit our website at geappliances.com
or call GE Answer Center
A
Cutout height
27-5/8" MIN.
A 28-1/8" MAX.
C
Cutout height
27-5/8" MIN.
28-1/8" MAX.
C
Recommended
cutout location
Recommended
from floor
cutout location
23" minimum
from floor
32-1/2"
door opening
32-1/2"
allowance
27''
PK7000
PK7000
JK5000
JK5000
JK3000
JK1000
JK3000
27" JK5000
JK1000
1"
27"
1"
1"
1"
1"
26-23/32" Suitable
1"
bracing
30-3/16"
to support
26-23/32" runners
26-23/32"
30-3/16"
26-23/32"
or GE appliance
®
service, 800.626.2000.
®
F
E
F
Conduit
E
40"
D
23" minimum
"
22
door opening
allowance
C L
2 x 4 or
C L
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
(must support 200 lbs.)
Suitable
bracing
(must support 200 lbs.)
to support
runners
* * ADA qualified based on Uniform
Federal Accessibility Standards
Specification Created 2/13
8-3/4"
MAX.
Cutout depth
Conduit
23-1/2" MIN
40"
Junction box
location
22" to
bottom of
D
junction box
"
22
B
2 x 4 or
Cabinet
equivalent runners
A – Overlap of oven at top of cutout
level with bottom of cutout
B – Overlap of oven over side of edge
and flush with sides of cutout
C – Overlap of oven at bottom of cuto
or solid bottom floor.
Oven
D – Overall depth with handle
E – Overall height with trim
F – Overall width
Listed by
Underwriters
Laboratories
320440
Cutout w
25" MI
25-1/4" M
27''