Non-Data Command Protocol - Fujitsu MHZ2080BJ Product/Maintenance Manual

Interface

5.4.1 Non-data command protocol

Execution of the following commands does not involve data transfer between the
host and the device.
•
RECALIBRATE
•
SEEK
• READ VERIFY SECTOR(S) (EXT)
• WRITE UNCORRECTABLE EXT
• EXECUTE DEVICE DIAGNOSTIC
•
INITIALIZE DEVICE PARAMETERS
•
SET FEATURES
•
SET MULTIPLE MODE
• READ NATIVE MAX ADDRESS (EXT)
• SET MAX ADDRESS (EXT)
•
SET MAX LOCK
•
SET MAX FREEZE LOCK
• IDLE
• IDLE (UNLOAD) IMMEDIATE
•
STANDBY
•
STANDBY IMMEDIATE
•
CHECK POWER MODE
• SMART DISABLE OPERATION
• SMART ENABLE/DISABLE AUTOSAVE
•
SMART ENABLE OPERATION
•
SMART EXECUTE OFFLINE IMMEDIATE
• SMART RETURN STATUS
• SECURITY ERASE PREPARE
• SECURITY FREEZE LOCK
•
FLUSH CACHE (EXT)
5-176 C141-E280