D-Link DWL-500 - 11Mb Wireless LAN PCI Network Card Quick Install Manual page 4

3 3
Installing the DWL-500 Wireless PCI CARD Installing the DWL-500 Wireless PCI CARD
Shut down the computer.
Insert the DWL-500 Wireless PCI Holder ,
without the PC CARD, into an available
PCI slot in the computer. Secure the PCI
Holder with a screw.
After the PCI Card Holder is secured, then
insert the PCI Card, facing down as
shown, into the PCI Card Holder.
Press the PC Card firmly into the PCI
holder.
After the PC card is firmly seated,
then restart the computer.
Rev. dwl-500.98-12-7-00,8am
4 4
Finish Installation Finish Installation
Windows will recognize the PCI Holder.
If the PC Card Wizard appears, refer to
Appendix C for installation.
If prompted for Windows 98 files or driver files,
please refer to Appendices A & B.
If the following prompt appears,
Click OK to continue.
Restart the computer.
After restarting, Windows will recognize the
PC Card drivers.
If prompted for Windows 98 files or driver files,
please refer to Appendices A & B.
Restart the computer to finish installation.
To check that wireless adapter is working, click
on the configuration utility icon in the task bar.
Make sure that there is a wireless connection
under the "link info tab".
Rev. dwl-500.98-12-7-00,8am