Usb Charger - Asus MAXIMUS VI GENE User Manual

4.4.7

USB Charger+

USB Charger+ allows you to quick-charge your portable USB devices even if your computer
is off, in sleep mode or hibernate mode.
Before using USB Charger+, ensure to disable the ErP Ready item from the Advanced >
APM > ErP Ready in the Advanced mode of the BIOS Setup program.
Launching USB Charger+
To launch USB Charger+, click
on the AI Suite 3 main menu bar.
USB Charger+ screen
Click to detect
the currently
connected USB
device
Ensure to connect your USB device into the USB port that supports this utility. Refer to
section 2.3.1 Rear I/O connection of your user manual for more details.
• The USB Charger+ does not support USB hubs and USB extension cables, and
generic USB cables.
• The USB Charger�� may not recognize some ASUS devices due to a special design.
ASUS MAXIMUS VI GENE
on the top edge of the screen, then click USB Charger+
Click to select the type of USB device that
you wish to charge when the system is off
Click to apply
the settings
Click to discard
the settings
4-19