c) Tightening torque of screw must be secured with 6kg-cm.
Damage : To absolutely guarantee integrity of the IDD disk enclosure (DE) insulation
once actually mounted to the frame inside the system, special attention must be given
to the cautionary notes below.
(2)
Limitation of side-mounting
Mount the side using the screw holes at both the ends as shown in Figure 4.7. Do not use the
center hole.
Figure 4.6
Mounting frame structure
Figure 4.7
Limitation of side-mounting
C141-E035-03EN
Do not use these holes
Use these holes
4 - 7