Fujitsu SOFTUNE F2 MC-16 User Manual page 277

Reset:
Loop Count "Number of times": Displays number of times which loop count occurs.
Extended time stamp frame:
Data Lost Error:
■ Display in Instruction Execution Order (Specify /INSTRUCTION.)
It is a form that is pulled out the divergence frame from the RAW data display, and supplemented between
frames with the reverse-assembly display. Special frames other than the program lockup frame are displayed.
The display in this mode is as follows.
Decimal,
signed
Special frame is as follows.
Trace ON code(data) hit:
Trace OFF code(data) hit:
Reset:
Loop Count "Number of times": Displays number of times which loop count occurs.
Extended time stamp frame:
Data Lost Error:
Disassemble Description
Display that supplements
between branch frames.
Frame Number
CHAPTER 2 DEPENDENCE FUNCTIONS
Indicates that reset is detected.
Displays here when the value of time stamp is 8191 or more.
Indicates that data is lost.
Indicates that trace acquisition is started.
Indicates that trace acquisition is stopped.
Indicates that reset is detected.
Displays here when the value of time stamp is 8191 or more.
Indicates that data is lost.
Time stamp
Displays difference of executed time
between this frame and next frame
(decimal).
The unit is cycle.
263