3 4 5 1 6
1
Arrayed microphones
Picks up the talker's voice.
2
Speaker
Outputs the sounds.
3
MENU/PC
Press to activate the PJP-25UR Controller.
4
SHORTCUT
Press to activate the function specified in the PJP-25UR
Controller.
5
VOLUME +/–
Press to adjust the speaker volume. Holding either key
increases or decreases the volume continuously.
y
• Pressing MENU/PC and VOLUME + at the same time switches the environment setting to "Conference Room".
Pressing MENU/PC and VOLUME – at the same time switches it to "Normal".
For details, refer to "Changing the environment setting" (page 8).
• Holding down MENU/PC and SHORTCUT at the same time resets this unit's settings.
Controls and Functions
2
1
7
6
MIC MUTE
Press to temporarily turn off (mute) the microphones. To
cancel the mute function, press it again.
7
USB port
Connect to the computer using the USB cable.
8
DC IN 5V terminal
Connect the AC adapter (sold separately).
9
AUDIO OUT terminal
Connect to the line-in on the audio device or computer.
0
AUDIO IN terminal
Connect to the line-out on the audio device or computer.
8
9
0
3