Huawei HG232f User Manual page 51

5 Configuring Frequently Used Functions
1. Log in to the Web-based configuration utility of router B.
2. In the navigation tree, choose Basic > WLAN.
The WLAN configuration page is displayed.
3. Set the following parameters.
Channel: 1
−
SSID Index: SSID1
−
SSID: mySSID
−
Enable SSID: Enable
−
Security: WPA-PSK/WPA2-PSK
−
WPA Pre-Shared Key: MyPassword@2012
−
WPA Encryption: AES
−
4. Click Submit.
Step 5 Configure the WDS function of router B.
1. In the navigation tree, choose Basic > WLAN.
The WLAN configuration page is displayed.
2. Click WLAN WDS.
3. Select Enable.
4. Select Repeater for WDS Mode.
5. Click New.
6. Select mySSID for Select SSID.
7. In MAC Address, enter AA:AA:AA:AA:AA:AA.
This MAC address is the wireless MAC address of router A and is recorded in Step 1.
8. Click Submit.
Step 6 Change the IP address of the LAN interface of router B.
1. In the navigation tree, choose Basic > LAN.
The DHCP page is displayed.
2. Under LAN Host Settings, enter 192.168.3.88 in IP address.
3. Under LAN Host Settings, click Submit.
Step 7 Disable the DHCP server function of router B.
1. In the navigation tree, choose Basic > LAN.
The DHCP page is displayed.
2. Under DHCP Server, clear Enable.
5-24
HG232f 300Mbps Wireless Router
User Guide