Accessories; Standard Accessories - Hitachi G12SA3 - 4-1/2" Grinder 8 Amp AC/DC Safety Instructions And Instruction Manual

WARNING:
Never use any accessories other than those mentioned below.
The use of any accessories other than those mentionded below or attachments not
intended for use such as cup wheel, cut-off wheel or saw blade is dangerous and may
cause personal injury or property damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

Depressed center wheel ..................................................................................................... 1
4-1/2" (115 mm) external dia.
5" (125 mm) external dia.
Wrench (Code No. 938332Z) .............................................................................................. 1
Side Handle (Code No. 994322) ......................................................................................... 1
NOTE:
Specifications are subject to change without any obligation on the part of the HITACHI.

ACCESSORIES

1/4" (6 mm) thickness
(Code No. 701045 or 326203) .............. G12SA3
1/4" (6 mm) thickness
(Code No. 701050 or 326205) .............. G13SB3
7/8" (22 mm) hole dia.
7/8" (22 mm) hole dia.
English
17