Insert and remove a CD.
Insert a PC card.
Remove a PC card.
To install the floppy drive
You can install the floppy drive or attach it externally to the parallel port.
1. If necessary,
remove the CD-ROM drive
2. Slide the floppy drive into the OmniBook until it clicks into place.
–or–
To connect the floppy drive to the OmniBook externally, pull out the floppy drive
cable and connect it to the parallel port on the left side of the OmniBook.
To remove the CD-ROM or floppy drive
1. Slide the switch to the right. A pull-tab pops out.
(or super battery) from the OmniBook.
23