Show Ip Bgp Dampened-Paths; Show Ip Bgp Detail - Dell Force10 Z9000 Reference Manual

show ip bgp dampened-paths

View BGP routes that are dampened (non-active).
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip bgp [ipv4 unicast] dampened-paths
Command Modes
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Usage
The following describes the show ip bgp damp command shown in the Example below.
Information
Field
Network
From
Reuse
Path
Example
FTOS>show ip bgp damp
BGP table version is 210708, local router ID is 63.114.8.2
Status codes: s suppressed, d damped, h history, * valid, >
best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
FTOS>

show ip bgp detail

Display BGP internal information for the IPv4 Unicast address family.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip bgp [ipv4 unicast] detail
Defaults none
394
• EXEC
• EXEC Privilege
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the network ID to which the route is dampened.
Displays the IP address of the neighbor advertising the dampened
route.
Displays the hour:minutes:seconds until the dampened route is
available.
Lists all the ASs the dampened route passed through to reach the
destination network.
Network From Reuse Path