Messages Regarding Printing Or Adjustment; Cannot Execute This Command. Use Other Paper; Cannot Print As Specified; Cannot Calibrate - Canon imagePROGRAF iPF6400 Basic Manual

iPF6400

Messages regarding printing or adjustment

Messages regarding printing or adjustment
Cannot execute this command. Use other paper. .......................................................................................... 131
Cannot print as specified. ......................................................................................................................................... 131
Cannot adjust printhead. ........................................................................................................................................... 134
Cannot calibrate. ........................................................................................................................................................... 131
Excessive temperature or humidity. ..................................................................................................................... 132
Please execute common calibration. .................................................................................................................... 132
Please commn calibrt using above paper. ......................................................................................................... 132
Please calibrate using above paper. ..................................................................................................................... 132
Before borderless printing, move the blue platen switch. .......................................................................... 132
Borderless printng not possible. ............................................................................................................................ 127
Blue platen switch is dirty. ........................................................................................................................................ 133
Move the blue platen switch No.xx to the right. (xx represents a number) ........................................ 133
Cannot adjust paper feed. ........................................................................................................................................ 133
Check printed document. .......................................................................................................................................... 133

Cannot execute this command. Use other paper.

Cannot execute this command. Use other paper.

Cause
Paper compatible with
1.
color calibration is not
2.
loaded.

Cannot print as specified.

Cannot print as specified.
Cause
The loaded paper is too small.
(When you have attempted to print a test print
sheet or other printer status information.)

Cannot calibrate.

Cannot calibrate.
Cause
The paper for printing a test pattern is soiled. Other-
wise, you have loaded colored paper.
The test pattern was printed too faintly.
Direct sunlight or strong lighting may be shining on the
printer and causing the sensor to malfunction.
Basic Guide
Press the OK button to clear the error.
Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See Paper Reference Guide .)
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot
be completed correctly unless the loaded paper matches the settings.
Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper.
(See "Removing Sheets.")
2.
Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.")
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Corrective Action
Corrective Action
→P.23
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
(See Paper Reference Guide .)
Press the OK button to clear the error.
Take steps to remedy faint printing.
(See "Printing is faint.")
→P.101
Press the OK button to clear the error.
Take steps to ensure the printer is not used when exposed to direct sunlight or
strong lighting.
Cannot execute this command. Use other paper.
→User's Guide
Corrective Action
131